Hot Dip Galvanised

Hot Dip Galvanised coating to over 40 microns for increased corrosion protection.

Need Assistance?
Contact our Engineering team now +44 (0)1435 866011

Product Information

Hot Dip Galvanised coating to over 40 microns for increased corrosion protection
Stainless Steel clips to reduce loss of protection when setting
A Through Bolt is a torque controlled anchor, where the hole size is the same as the bolt. All our Through Bolts are packed with nut and washer pre-assembled
For loads for 30 N/mm2 concrete
Shear loads are for loads away from a free edge

With ISO9001: 2015 approval incorporating Design Status, our qualified engineering staff are able to offer a completely free of charge engineering service and are available to assist with part selection, custom design, application requirements, material selection and more.

Applications are discussed in-depth, first-off design data and drawings are submitted for approval to ensure our customers are provided with the correct design, first time. However, on those rare occasions when modifications are necessary, our no-tooling process and flexible manufacturing procedures means the production of prototypes is easily and economically achieved without onerous tooling charges and long lead times.

At TFC we realise that Quality runs through the entire business, not just our products. We have continually invested in the right people to provide the superior market knowledge and customer service.

Our supply chain partners, from manufacturers to logistics and information technology are carefully chosen to ÿt our commitment to quality

Quality assured since 1981
ISO 9001:2015
Aerospace AS9100C & AS9120A

All products are batch traceable and can be supplied in accordance with REACH, RoHs and Weee.

Certificates of Conformity are available on request and Full material certification is also available on many items.

Size	Anchor Hole Size	Anchor Length	Thread Length	Fastens Up To	Min Hole Depth	Embedment Depth (mm)	Fixture Clearance Hole (mm)	Centre Spacing (mm)	Edge Distance (mm)	Structure Thickness (mm)	Recommended Tensile Load kN	Recommended Shear Load kN	Recommended Tight Torque kN
M8x50	8	50	22	5	45	40	9	75	60	60	2.8	3.2	10
M8x75	8	75	25	10	65	40	9	75	60	60	2.8	3.2	10
M8x95	8	95	25	30	65	40	9	75	60	60	2.8	3.2	10
M8x120	8	120	25	55	65	40	9	75	60	60	2.8	3.2	10
M10x60	10	60	25	10	50	50	12	105	80	80	4.3	5.8	28
M10x85	10	85	30	10	70	50	12	105	80	80	4.3	5.8	28
M10x105	10	105	30	30	70	50	12	105	80	80	4.3	5.8	28
M10x125	10	125	30	50	70	50	12	105	80	80	4.3	5.8	28
M12x85	12	85	25	10	80	60	14	140	100	100	6.8	7.2	34
M12x100	12	100	35	15	90	60	14	140	100	100	6.8	7.2	34
M12x115	12	115	35	20	90	60	14	140	100	100	6.8	7.2	34
M12x145	12	145	35	50	90	60	14	140	100	100	6.8	7.2	34
M12x180	12	180	80	85	90	60	14	140	100	100	6.8	7.2	34
M16x110	16	110	60	15	90	70	18	165	130	110	8	10.4	85
M16x125	16	125	40	10	110	70	18	165	130	110	8	10.4	85
M16x150	16	150	40	30	110	70	18	165	130	110	8	10.4	85
M16x200	16	200	55	80	110	70	18	165	130	110	8	10.4	85
M20x170	20	170	45	35	130	100	22	195	160	130	10.8	14	160
M20x220	20	220	55	75	130	100	22	195	160	130	10.8	14	160
M20x280	20	280	55	135	130	100	22	195	160	130	10.8	14	160