Laminar Sealing Rings

TFC is the only UK and leading European supplier of Smalley laminar seal rings. Smalley and TFC have built a reputation for unrivaled quality and a collaborative engineering team.

Laminar sealing rings

• They seal the assembly components against contamination
• Many configurations are available
• Made of metal, not rubber, neoprene or other non-metallic materials
• Resistance to high temperatures and corrosive environments

Laminar configuration

The WQSD series configuration consists of 2. 2-turn laminar seals against the shaft. When excessive contamination is present in the environment or a worker requires additional protection, laminar seal rings can be used in combination to provide additional sealing. This application doubles the WQSD ring arrangement by placing a second set of rings in an additional groove to increase the sealing effect. This combination has a third ring installed to create an additional maze.

Application

Connector – The sealing system in this assembly has been specially designed to provide optimal protection against contamination. The gases create pressure in a central cavity, protected at both ends against the ingress of contaminants. The design ensures the purity of gases entering and leaving the central cavity.

Environment

High pollution: small particles and gases.

With over 40 years of experience and an on-site and field technical support team, TFC will be happy to advise you on the ideal laminar seal rings for your application.